|
|
|||||||
| Dodge/Cummins General Discussion Everything that does not fit in a specific forum |
 |
|
|
Thread Tools |
|
#1
02-25-2010, 01:38 AM
|
||||
|
||||
|
Tie Rod repair kits (anyone every try these?)
I got this link from a friend that had gotten poly bushing for his 3rd gen trackbar for cheap (44 bucks I believe). Fixed his death wooble he had. Anyway was looking at the end link repair kits. Mine isn't too loose yet as it was rebuilt about 40,000 ago. Just curious if anyone has tried anything like this?
http://lukeslink.com/
__________________
2002 CTD, 6 Speed, Edge Juice w/Att. (Hot), Edge Jammer 4's, SB DD 3600, Fass 150, Adj. IAT Box, BHAF, ProComp 2" Leveling Kit, Rancho Shocks, 3rd Gen Brakes, Firestone Air Springs, Isspro Boost-Pyro-Trans Temp, Toughneck Bumpers, Kenwood in-dash DVD/Nav &MTX Subs. 
|
|
#2
02-25-2010, 12:15 PM
|
|||
|
|||
|
I have ran them in the past, they work for awhile.
__________________
 VP-44 Guru, now playing with common rails........
|
|
#3
03-01-2010, 09:44 PM
|
|||
|
|||
|
I put one on a 1/2 ton gasser we have. Tightened the track bar up, fixed the wobble.. It still seems to be ok after 30k.
__________________
1998.5 QC SB 4x4 DTT Trans, Mach 4's, Ported Head, II SPS64, II HRVP44 & A Few Other Things 580+ hp Also have a 96 dually and a 93 that's slowly getting a ramcharger body. 10 sec BB dart
|
|
| Bookmarks |
| Thread Tools | |
|
|
